Hardness Tester
Ultrasonic Thickness gauge
 
 
     
     
     
   
     
     
     
     
     
     
     
     
     
   
   
   
   
     
 
 
 
 
 
 
 
 

 

Overview


The QS5 B is loaded with advanced features such as a material condition analyzer that alerts the operator on the possible presence of corrosion or pitting, realtime BSCAN graphics with speeds of up to 20Hz, a coupling level indicator, and much more.

Tubes, pipes, storage tanks, valves, pressurized recipients, and naval hulls just to name a few, can all be inspected with the QS5 B. Plastics, acrylics, ceramics, and glass can also be measured. Make sure to choose the most appropiate transducer for your application.

 

 

Measure

  • Pulse-Echo
    Range:
    0.6 to 500mm /
    0.025 to 19.999in Depending on transducer and material
  • Resolution:
    0.01mm / 0.001in

Units

  • Metric (mm)
  • Imperial (in)
  • Temporary (us)

Calibration

  • Auto, 1 point (no Cal key) Calibrate using the test block on the front panel
  • 2 point calibration

      

Graphic LCD Display

  • LCD 128x64 pixels
  • LED backlight illumination
    (ON, OFF, Auto)
  • Digit sizes:
    12, 17mm /                 0.47, 0.66in
    Depending on view mode
  • Contrast adjustment     

  

Alarms

  • Low & High, user defined
  • Material Condition
  • Alarm Types
    Visible: Flashing backlight and irregular digits
    Audible: Intermitent beep

Features

  • Coupling energy level indicator
  • Material condition analyzer (corrosion, pitting)
  • B-Scan graphic representations
  • Adjustable gain and trigger
  • Capture minimum
  • Statistics
  • On screen materials velocity chart

    

Multi-Language

  • English
  • Spanish
  • Portuguese

Model Upgrade Licenses

  • Upgrade to any of the models below with the purchase of licenses
    QS5 DL
    QS5 E
    QS5 DLE

Data Logger

  • 32000 readings that can be viewed on the unit screen

Connections

  • Type Lemo "00" connectors for transducer
  • The USB port can be used if upgrading to a QS5 DL or QS5 DLE

        

Warranty

  • 5 year limited on electronics
  • 6 months on accessories

Front Panel

  • Touch-Sense with sensitivity adjustment
  • No mechanical parts
  • Auto pressure recognition
  • Auto scrolling recognition

    


Power Supply

  • 2 x AA 1.5v Alkaline
  • 2 x AA 1.2v Ni-MH Rechargeable
  • Easy slide battery compartment cover

        


Dimensions

  • H: 117mm / 4.60in
  • L: 78.74mm / 3.10in
  • W: 24mm / 0.94in 

    

     
  dmq QS5 B standard configuration  

 

 
  dmq QS5 B electronic unit  
  dmq 5MHz standard transducer  
  Coupling gel  
  Printed user manual  
  High impact carrying case  
  Certificate of conformity  

 

 
DP10 dp300

2015 Copyright © demeq  All rigths reserved.